New Energy Vehicle Charging Operation Specifications

New Energy Vehicle Charging

AC circuit and power socket (16A socket), external conversion connectors, power strips, etc. are not allowed, and the 16A power socket should be well grounded.

The dedicated AC circuit is to avoid line damage or line tripping protection due to high power when charging the power battery. If the dedicated line is not used, it may affect the normal operation of other equipment on the line.

In order to avoid damage to the charging equipment, please pay attention to the following matters.

1. Do not close the charging port cover when the plastic cover of the charging socket is open;

2. Do not pull or twist the charging cable;

3. Do not subject the charging equipment to impact;

4. Do not place the charging equipment near a heater or other heat source.

5. It is not recommended for people to stay in the vehicle when charging.

6. It is recommended to park the vehicle in a ventilated place when charging.

7. When stopping charging, the vehicle plug of the AC charging connection device should be disconnected first, and then the power supply plug at the power end should be disconnected.

8. Do not leave the vehicle in an environment above 55℃ for more than 24 hours; or below -25℃ for more than 24 hours.

Written by: Mooncake from WTech
The Exporter and Manufacturer of Heaters since 2003
Welcome OEM ODM
https://wtech.cc